Instructions / Assembly

11
MODEL# 9314TS - TRAMPOLINE
ASSEMBLY INSTRUCTIONS
STEP 4:
A. Gather all Leg Extensions (Part 6) and
begin inserting them into the T-Sections
NOTE:
The Leg Extension will have 3 openings.
The 2 square openings closest to each
other, will go inside the T-Section. Make
sure that wider section is facing the center
of the trampoline.
B. Use M6 Bolt & Nut (Part 5) to install the
Leg Extensions to the body of the T-Section
STEP 5:
Place the U-Shaped Legs (Part 7) on top of
the extensions while keeping the openings
facing the center of the trampoline.
If Step 4 has been followed correctly, you
will be able to see both openings from the
Leg Extension and U-Shaped Legs.
If you are installing the Pure Fun 14FT
Trampoline Enclosure (Model# 9314E) We
recommend you install M6 (Part 5) loosely
until you start the Owners Manual of the
enclosure.
The bolt and nut will keep the trampoline
attached safely until you finish installing it
completely.
Once the trampoline is finished, the Bolt
and screw will have to be removed in order
to install the parts for the enclosure pole.
IMPORTANT MESSAGE
WARNING - PLEASE READ
A B