Instructions / Assembly

13
MODEL# 9314TS - TRAMPOLINE
STEP 8:
Place the Jumping Mat (Part 1) in the middle
of the frame and unfold it completely.
NOTE:
Make sure the stitching of the Jumping mat
is facing the floor
In order to avoid ripping and to distribute
tension when attaching springs to the
frame, follow the numbered order shown.
Once a spring is attached to the Jumping
mat, you must attach the other in the
opposite direction of the mat.
Once the first 16 Springs (Part 9) have been
placed, Attach all remaining Springs using
the T-Hook that was provided clockwise.
NOTE:
Failure to use appropriate tools may result
in injury or pinching due to tension of the
springs. We recommend you use gloves
when attaching springs to the frame.
HOW TO USE T-HOOK:
In order to insert the spring properly, hook
the curved end to the V-ring of the jumping
Mat. Then, pull on the Long Round end with
the T-Hook until it is attached on one of the
corresponding openings of the Top Rail.
1
5
6
7
8
9
10
11
12
13
14
15
16
3 4
2
ASSEMBLY INSTRUCTIONS