Instructions / Assembly

9
MODEL# 9314TS - ENCLOSURE
ASSEMBLY INSTRUCTIONS
STEP 3:
A. Remove the Nut and Screw from 14FT
Enclosure Trampoline on the right side
of the U-Shaped Leg.
Do not remove all nuts and bolts at the
same time, only 1 set a time to keep the
strength of the Frame at all times.
NOTE:
Make sure to keep removed parts stored
or in a safe place away from the mat while
building the Enclosure.
B. With the help of another adult, hold the
completed enclosure pole by aligning
both square holes to begin installation.
NOTE:
Curved Enclosure Pole must face the center
of the trampoline.
C. Once aligned, screw in the completed
pole to the leg. Follow the directions on
the next page (Page 10) for the order and
right parts to attach properly
D. Continue to do this on all U Shaped Legs
one by one until you ave installed all 6
Enclosure poles tightly.