Installation Guide

8
[e-mail]
1-866-498-5269
ASSEMBLY INSTRUCTIONS
STEP 1:
Gather all Curved Enclosure Poles (Part 2)
and Enclosure Pole Caps (Part 3).
IMPORTANT:
Do not attach the Enclosure Pole Caps
to the Straight Enclosure Poles. Once an
Enclosure Pole Cap has been installed
it cannot be removed.
Snap and click all Enclosure Pole caps
to the Curved Enclosure Pole. The button
must be pushed down, and you will hear a
click once successfully attached.
STEP 2:
Collect all Straight Enclosure (Part 1)
Connect the Straight Enclosure Poles and
Curved Enclosure Poles using the Snap and
Click mechanism. Button must be pushed
down, and you will hear a click once
successfully attached.
You will have 6 completed Enclosure Poles.