Instructions / Assembly

8
[e-mail]
1-866-498-5269
ASSEMBLY WARNINGS
• The minimum overhead clearance required is 26 feet
(8 meters). Ensure that no hazards or obstructions
are near the trampoline such as tree branches,
swing sets, swimming pools, electrical power wires,
walls, fences, roof overhangs etc.
• Please be aware of the following when selecting a
place for your trampoline:
• Trampoline must be placed on a level surface.
• All obstructions from overhead, underneath or
around the trampoline must be removed.
• Do not use this trampoline indoors.
• Do not use this trampoline on any slippery/smooth
floor surface, uneven or sloping ground surface.
• Do not place the trampoline on hard surfaces, such
as asphalt, stone, concrete etc, as this can damage
the frame.
• You increase the risk of serious injury and/or death if
you do not follow these guidelines.
• The area must be well lit.
• When you are ready to start, make sure that you have
the correct tools at hand, and adequate space for
assembly.
• Please refer to the table for part descriptions and
numbers. The assembly instruction uses these
descriptions and numbers as reference. Make sure
you have all parts listed. If you are missing any parts,
please contact our customer service.