Owner Manual

12
[e-mail]
1-866-498-5269
FREQUENTLY ASKED QUESTIONS
CARE & MAINTENANCE
• IMPORTANT: While no regular maintenance
is required, you must inspect the see saw
before each use and replace any worn,
defective, or missing parts. The following
conditions could represent potential
hazards: Missing, improperly secured or
damaged bolts, A bent or broken frame,
and/or damaged seats. Cease using see
saw immediately and secure it against
unauthorized use if any of these conditions
are present.
• Regularly check to see if see saw seats,
steel tubes, and other parts are tightened
and completely secure. Replace worn
& damaged parts when if found and
if necessary, secure from use until
replacement parts can be obtained.
• If the paint is chipped, we recommend you
lightly rub the damaged area and cover
using a non-toxic enamel paint.
• Your see saw is designed to be very low
maintenance.
• If any part of the see saw requires cleaning,
simply wipe with a damp cloth.
• Question: “How should I clean my see saw?”
Answer: You should clean the See Saw with
a solution of warm water and non-corrosive/
abrasive soap. Dampen a rag with this
solution and wipe completely dry before sing.
• Question: “Is there any maintenance I need to
do for my see saw?”
Answer: You should always double check to
make sure all your bolts are tight and secure,
and that the seats are full fully secure.
• Question: “A seat seems loose, what should
I do?”
Answer: Make sure the bolts under the plastic
steps are secure.
• Question: “Something was missing from
the packaging,” “I need to purchase a
replacement part” or “I discovered a damaged
piece. What should I do?”
Answer: You must report missing pieces
within 30 Days from Date Of Purchase. Please
be aware that under our limited warranty,
for some parts we require a picture of the
damaged item and/or return of the item to our
quality control office for review.