Product specifications

3) Slowly re-open the cold water supply line.

4) Open the valve on top of the storage tank.

5) After about 20 minutes you should see water coming from the faucet. (It will take some time for

the DI module to ﬁ ll with product water.)

6) Check for leaks around the tops of the pre-ﬁ lter canisters. If water is seeping from any of the can-

isters turn the cold water supply off, relieve line pressure by pressing the red button on top of the

canister, and then unscrew the leaking canister from the assembly. Check to be sure the O-ring is

properly seated and then carefully re-attach the canister to the assembly, taking care to align the

ﬁ lter module inside. Tighten until ﬁ rm.

7) Check for leaks at either end of the DI module.

8) Close the faucet and allow the system to produce a full storage tank of water.

9) Drain off and discard this initial tank of water. Do not use for cooking or drinking.

10) You are now ready to enjoy great tasting, pure BEV water for another 12 months!

Maintenance and Servicing 15