Product specifications

Thank you for your purchase of this quality water purifi cation system by Pure Water Systems, Inc. Your
new PWS™ BEV-300 Series system combines several of the most effi cient methods of water treatment
to achieve a very specifi c result—ultra-pure water that meets the rigorous Vincent (BEV) standards for
bio-compatibility.
As the new owner of a PWS™ BEV-300 pure water appliance there is a totally new experience awaiting
you. You and your family will be amazed at the delightful new taste of your tap water—it’s like owning
your own personal mountain spring.
This manual provides information about the application and servicing of your PWS™ BEV-300 Series
pure water appliance. Descriptions of the components and their functions will help to answer frequently
asked questions. By thoroughly reading this manual you will be better able to operate your new system
and perform simple maintenance.
SETTING UP YOUR BEV SYSTEM
Your PWS™ BEV-300 system requires no electricity—the only requirement is adequate water pressure.
This unit is designed to operate within a pressure range of 40–100 PSI (2.75–6.9 bar). The amount of
purifi ed water produced depends primarily on your water pressure, temperature, and the amount of
dissolved solids. The custom reverse osmosis membrane will produce up to 40 gallons (~150 liters) per
day of pure BEV quality water. If you plan to install this unit on a private well system, you should check
your water pressure gauge. If the pressure is less than 40 PSI (2.75 bar), ask a plumber to adjust and raise
the pressure to the minimum level of 40 PSI.
Quick Description of Installation…
1) Unpack the system.
2) Review this manual.
3) Inspect the installation location—verify the system
and storage tank will fi t beneath sink.
4) Attach the pre-fi lters to the frame.
5) Install the faucet.
6) Install the feed water saddle valve.
7) Install the drain saddle valve.
8) Mount the 4-Stage Deionization Module.
9) Mount the pre-fi lter & RO assembly.
10) Turn on the cold water.
11) Produce and then discard the fi rst tank of water.
1) Unpack the System
As you unpack your new PWS™ BEV-300 Series system, inspect all parts to make sure they have not
been damaged in transit. If damage has occurred immediately fi le a claim with the freight company.
Contents include:
• Chrome Faucet Assembly
• Feed Water Saddle Valve Kit
• Drain Water Saddle Valve Kit
• 4-Stage Deionization Module & Clamp
Getting Started
4
1
CHAPTER