User's Guide

½” diameter Nyloc nuts
4
316 grade stainless steel
washer
0.53” inner diameter
1.25” outer diameter
4
316 grade stainless steel
washer
0.58” inner diameter
1” outer diameter
4
1. Insert a bolt and 1.25” washer into the top two holes on the transom, pushing them from
the inside of the transom towards the outside.
2. Use a crane or two people to lift the Outboard on to the edge of the transom.
3. Align the bolts with the holes on the Outboard transom mount and push the bolts
through.
Figure 10.3 – Bolts Aligned in Transom and Outboard
77