User's Guide

Figure 10.8 – Steering Linkage Assembly

7. Place another washer and the steering heim joint (#3 and #4 in Figure 10.8) on top of

the steering bracket.

8. Place a washer on top of the steering heim joint and insert the bolt (#5 and #6 in Figure

10.8) through the washers, steering heim joint, and nut. Tighten the bolt into the nut on

the underside of the bracket.

Figure 10.9 – Attaching Steering Linkage to Outboard’s Steering Arm

9. Insert one end of the steering linkage into the steering heim joint (#7 and #4 in Figure

10.8) and the other end into the hole in the steering cable.