User's Guide

Figure 10.15 – Tightening Tail Cone Fasteners
10.5 Installing the Throttle
Tools:
● 5mm Allen wrench
● Loctite 425 threadlocker
10.5.1 Option 1: Top Mount
Parts:
Part No.
Description
Quantity
ISO4762-M6x10-A4-70
M6x10 316 stainless steel screws
4
N/A
Throttle Cable
1
N/A
Auxiliary Power Output Cable*
1
N/A
Auxiliary Output Connector Cap**
1
*Use if connecting 12V to onboard electronics or an external 12V battery.
**Use if not connecting 12V to onboard electronics or an external 12V battery.
Installation steps:
1. Drill four holes of diameter 6.6 mm +/- 0.2 mm according to the spacing in Figure 10.19.
86