User Manual

Safety
Before you use your Move T4 ,read the following safety instructions.
1.
Read allthe safety informationand instructions before using the product.Whenp assing this product to someone,
include alldocuments.
2.
If you do not follow the operating instructions provided, it may compromise the safety of your product and this may
invalidate the warranty.
3.
Do not expose the product to dripping or splashing.Do not place objects filled withliquids, suchas vases, onthe
product.
If liquid or water spills onto the product,switchit off immediatelyand contact yourdealer.
If you are using a mains-powered adapter,do not touchthe product withwet hands.
4.
The internalbatte ry inthis product is not use r replaceable. Do not expose the battery to excessive heat or nake d
flames. Ensure adequate ventilation and airflow around the product,particuarly whencharging.Dispose of the
product in accordance withlocalenvironmentalrules.
5.
Using the product inrooms or climates withhighhumidity and temperatures may cause condensation to form inside
the product,whichcandamage the product.Use the product in mode rate climates only.
6.
Do not use yourp roduct inextremely hot or cold te mperature.Keep the device away from heat sources, suchas
radiators or gas/electric fires. Do not expose your product to naked flames, suchas lighted candles.
7.
To charge yourproduct, only connect it to a supplysource that meets the safety isolationrequirements of
EN60065 or EN60950-1 for anaccessible safety extralow voltage circuit.For this connection,use either the
supplied micro-USB cable or asuitably CEapproved po wer adapter withthe correct USBoutput rating.
8.
Powe r the product using ane xternal5 V DC 1.5 A powe r supply.The maximum output current is 1.5 A,protected by
aninte rnalcircuit.
9.
Before you charge yourproduct, ensure that the available supply voltage corresponds withthe required
operational voltage of the product.
10.
Disconnect yourproduct from the charging power supply if you willnot use your product for a long period of time
(for example,if youare going on holiday).
11.
Always unplug your product from the charging power supply before cleaning.Whencleaning the product, do not
use any type of abrasive pad or abrasive cleaning solutions as these may damage the product's surface.
12.
To reduce the risk of electric shock,do not remove any screws. The product does not containany user-serviceable
parts inside. Product repairs should only be carried out by authorised pe rsonnel.
2