Orla_Mio_manual-v4-UK-Aus.
Pure Warranty Statement for Australia This statement replaces any reference to warranty which may be contained elsewhere within this manual. What do you need to do now? Option 1: You can register your purchase on-line at https://www.pure.com/au/register/register.asp. Option 2: Or you can do nothing other than keep your proof of purchase as evidence of your purchase date. This proof of purchase would need to be presented if warranty service was ever required.
Thank you for choosing Evoke Mio by Orla Kiely. This manual will get you up and running in no time, and explains how to make the most of your Evoke Mio. We’re constantly improving and adding new features to our products. To take advantage of any enhancements made since your product was shipped, please visit www.pure.com where you can check for any updated versions of software and download the latest version of this user guide in PDF format.
Safety Instructions 1. Keep the radio away from heat sources. 2. Do not use the radio near water. 3. Avoid objects or liquids getting into the radio. 4. Do not remove screws from or open the radio casing. 5. Fit the mains adaptor to an easily accessible socket, located near the radio and ONLY use the mains power adapter supplied. Always switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK. Copyright Copyright 2013 by Imagination Technologies Limited.
Contents 4 Start 4 5 5 Quick set up Controls at a glance Rear connectors 6 Using your Evoke Mio 6 6 7 7 Adjusting and muting the volume Changing stations Changing the information shown on screen Pausing and controlling scrolling text 8 Setting the alarm & timers 8 9 10 10 Setting the alarm Cancelling an alarm Setting the kitchen timer Setting the sleep timer 11 Presets and Intellitext 11 12 Storing and selecting presets Intellitext 13 Setup options 13 13 13 15 15 Options available in digital
Start Quick set up 1 • Unclip the aerial and fully extend it (steps A and B). • Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C). • Plug the mains adapter into the mains supply (D). B A 6V DC Stereo Out Stereo Out Aux In D 6V DC 2 C Select your language when prompted. Turn the tune dial to select (English/ Francais/Deutsch/Italiano) and push to confirm. Tune 3 Aux In 6V DC ect Language.
Controls at a glance Tune dial Browse and select radio stations (see page 6) or pause and rewind scrolling text (see page 7). Volume dial Adjust and mute volume (see page 6). Source Press to select Digital radio, FM radio or Auxiliary input (see page 6). Standby Switch the radio into standby or off if a ChargePAK is fitted (see page 16). Presets 1 − 6+ Store up to 30 digital or FM radio preset stations (see page 11).
Using your Evoke Mio Adjusting and muting the volume Turn the volume dial to increase or decrease the volume. Press it to mute. Volume Volume Volume - + - + BBC Radio 2 Muted Change source Use the Source button to choose between digital radio, FM radio or Auxiliary device (a separate device such as an MP3 player connected to the Aux In socket).
Changing the information shown on screen You can change the information that is displayed on screen. Press the Info button and repeat to cycle through the information display options available for the current audio source. Scrolling text Information broadcast by most digital stations and some FM radio (RDS) stations. Full screen time Displays the time (and an alarm indicator if the alarm is set). Signal quality Displays digital signal quality: 85 to 100 good; 70 to 84 OK; 0 to 69 poor.
Setting the alarm & timers Off Set alarm Setting the alarm Off On 1. Press the Timer button, turn the Tune dial and push to select ‘Alarm settings’. 07:00 08:00 set hours Evoke Mio has an alarm which switches the radio on (if in standby mode) and tunes to a digital or FM radio station or sounds an alarm tone. 2. Push the Tune dial to select ‘Set alarm’, scroll to ‘On’ and push the Tune dial to select. The alarm is now active. 3. Push the Tune dial to select ‘Set time’.
08 Alarm volume 10 08:30 The alarm is set to sound at 8:30 am 08:30 08:30 22:45 08:30 8. If you have selected a digital or FM radio alarm you can push the Tune dial to select ‘Alarm volume’ and turn to adjust the volume level for the alarm from 1 (very quiet) to 32 (very loud). That’s it! You can see if the alarm is currently switched on in the ‘Full screen time’ display (see page 7). Alarms can be set and adjusted from standby by pressing the Timer button.
Setting the kitchen timer Evoke Mio has a countdown timer which will sound an alarm after a set time period. 01 hours 00 mins 01 hours 25 mins To set the kitchen timer 1. Press the Timer button, turn the Tune dial and push to select ‘Kitchen timer’. 2. Turn the Tune dial to change the hours and push to confirm. Turn again to change the minutes and push to confirm and start the countdown timer. The alarm will sound after the time period you have set whether the radio is on or in standby.
Presets and Intellitext Storing and selecting presets Store up to 30 of your favourite digital or FM radio stations in a combined list. BBC Radio 6Music Now playing: No Cars G To quick-store a station to a preset button (1–5) BBC Radio 6Music Preset 01 saved Tune to the digital or FM radio station you want to store. Press and hold one of the numbered Preset buttons (1–5) for two seconds until you see the ‘Preset saved’ message on the bottom line.
Intellitext Intellitext® provides on-demand text information such as sports headlines, weather forecasts and news from digital stations that support the service. The text is updated by the broadcasters and stored in your radio while you listen to stations. Intellitext is listed by station and split into categories, eg, Football, Cricket, Headlines, etc. SPORT FOOTBALL FOOTBALL Man City complete the s To view Intellitext messages 1.
Setup options Press the Menu button to access the options menu, turn the Tune dial to scroll through the options and push the Tune dial to select. Options available in digital radio Autotune Scans all digital radio frequencies for stations and automatically adds any new stations found to the station list. This may take a few minutes. To stop an Autotune press Menu. Options available in FM radio FM tuning mode Seek When you turn the Tune dial, the radio tunes to the next station with a good signal.
Adjusting the display You can adjust the brightness and time-out duration of the display for when the unit is switched on and in standby. To change display options: 1. Press Menu, scroll to ‘Display settings’ and push the Tune dial. 2. Now choose either ‘Active’ to change settings that apply when the unit is switched on, or ‘Standby’ to change settings that apply in standby.
Energy saving Evoke Mio is designed and manufactured to minimise power consumption when the unit is switched on and to use less than 1 Watt in standby. One way this low power consumption is enabled is by not collecting and storing Intellitext messages when the unit is in standby. You can override this option by switching off energy saving mode, but this will increase standby power consumption.
Using a ChargePAK ChargePAK E1 is an optional rechargeable battery pack which plugs into the socket in the radio’s battery compartment. Whenever your radio is connected to a mains supply, the ChargePAK will be charging and the power remaining will be available to view as a percentage in the Information display options (see page 7). To purchase a Pure ChargePAK E1, contact your nearest Pure dealer or visit the shop on our website at www.pure.com. Installing a ChargePAK 1.
Help and Specifications Secondary and inactive stations (<>) Secondary digital radio services Some stations have accompanying secondary services which provide extra information or alternative content and may only be broadcast at certain times. If a station has a secondary service available, the station shows ‘>>’ next to its name in the station list and the secondary service appears next to the station in the list. A secondary service has a ‘<<’ before its name in the station list.
Technical Specifications Radio Frequencies Digital and FM radio DAB/DAB+/DMB-R/Parametric stereo decode up to 256 kbps, FM radio 87.5-108 MHz. Speaker Full-range 3" drive unit. Inputs 6V DC power adapter socket (230V supplied). 3.5mm Aux In for auxiliary devices. USB connection (Mini-B type) for product upgrades only. Outputs 3.5mm headphone, 3.5mm stereo out (analogue). Presets 30 digital radio and FM radio presets in a combined list.
Pure UK Headquarters Imagination Technologies Ltd. Home Park Estate Kings Langley Herts, WD4 8LZ United Kingdom www.pure.com http://support.pure.com Orla_Mio_manual-v4-UK-Aus.indb 23 Pure Australasia Pty Ltd PO Box 5049 Wonga Park Victoria 3115 Australia sales.au@pure.com http://support.pure.
www.pure.com connect.pure.com www.facebook.com/pure www.orlakiely.com 104KB Orla_Mio_manual-v4-UK-Aus.
