Owner`s manual

VU-Meters
The VU-meter [4] can monitor the Input signal 1 and Input signal 3 or the left channel
of the Stereo IN signal. It can monitor the left channel output signal, in loopback
configuration.
The VU-meter [5] can monitor the Input signal 2 and Input signal 4 or the right
channel of the Stereo IN signal. It can monitor the right channel output signal, in
loopback configuration.
They provide a 10 steps logarithmic 3 dB/step scale and are very useful to check and
adjust the input signal level when recording.
CE Declaration of Conformity
This equipment has been tested and found to comply with the limits for:
CEI EN 55022 (Radiated and conducted Class B Emissions)
CEI EN 55024 (Radiated and conducted Immunity)
CEI EN 61000-4-3 (Radiated RF Immunity)
CEI EN 61000-4-2 (ESD Immunity)
Tested by Laboratorio CE s.a.s,
Via Garibaldi – 00010 Montelibretti (Roma) - ITALY
July 2004
Complete compliance documentation is available on request.
X4 Owner's Manual - Rev. 1.4 - page 20