Technical data

➣
Explanation of the menu bar and the individual pull-down menus.
From the menu bar you can obtain all the menu items. The menu items
in the menu bar represent a group of functions. The pull-down menu
items represent the operations or commands used to activate the indi-
vidual COM function screens. The NCM selection menu is no longer
visible when a COM function screen has been activated by a pull-down
menu item.
If you select a pull-down menu item marked with an arrow tip (>), you
obtain a further pull-down menu in which you can select other pull-down
menu items.
Pull-down menu items marked with an asterisk (*) are disabled.
➣
Selecting pull-down menu items (i.e. commands):
When you select a menu item in the menu bar with the arrow keys, you
automatically open the corresponding pull-down menu. After this, you
select a menu item with the arrow keys and then press <enter>. To
activate a menu point you can also use the keyboard shortcut, i.e. the
highlighted letter in the menu item title. You can, for example, select the
Edit menu from the menu bar with <E> and the Init command from the
pull-down menu with <I>. You can terminate every action with the
<ESC> key and return to the previous menu. After you activate the
item, the corresponding COM screen is opened. Once you have com-
pleted work with the screen, you return to SINEC NCM.
➣
From S5-DOS/ST Stage VI onwards, you can also select menu items
with the mouse. In this case, you select menu items with the mouse
pointer. The actions are activated with the suitable keyboard operation
or by pressing the left mouse button.
B8976060/02 Basics of Configuration
6 - 5 Volume 1