Technical data

Documentation:
Footer: With this you decide whether you want a footer printed
out at the end of each page (refer to footer file, possible
selections: ON/OFF).
Printer output: Controls the output either only on the screen or on the
printer and screen (possible selections: ON/OFF).
Printer file: Format: drive : printer file
- Drive: Here, you specify the drive you want to work with. If
you press F8 the possible drives are displayed.
- Printer file: In this file, you specify printer parameters that can be
created with the S5-DOS utility "printer file" (possible
selections: alphanumeric characters and the period).
Footer file: Format: drive : footer file
- Drive: Here, you specify the drive you want to work with. If
you press F8 the possible drives are displayed.
- Footer file: If you want printouts with a footer, the footer file must
be specified. The footer is created with the "footer
editor" utility (possible selections: alphanumeric
characters and the period).
With "Printer output OFF/ON" the printout is switched on or off. With "Footer
OFF/ON" the printout of a footer at the end of a page is switched on or off.
If you want to print with a footer you must specify the footer file.
☞
You must first enable the drives you want to work with as
default drives in the S5-KOMI.
B8976060/02 Basics of Configuration
6 - 19 Volume 1