Technical data

Date created: Date (max. 8 ASCII characters)
Plant designation: Designation of the plant (possible selections: ASCII
characters).
Output fields
Submodule type: This parameter is updated in the online mode and is
used to display the read submodule type. The following
memory types are allowed: "RAM", "EPROM".
Module ID: The module ID is entered by the firmware when an
upload is performed. The COM enters the expected
module ID.
Online:
specific hardware ID entered by the firmware.
Offline:
entry based on the module type.
Firmware version: Firmware version in the form "V X.YZ".
Function keys
F7
OK
The "OK" function key enters the data. If the module file
does not yet exist it is set up after confirmation.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
B8976060/02 Basics of Configuration
6 - 23 Volume 1