Technical data

Function keys
F1
CALCULATE
This key triggers the calculation of the bus parameter
databased on the information.
F7
OK
The "OK" function key enters the data. If the module file
does not yet exist it is set up after confirmation.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
6.5.3.2 Local Network Parameters
In this screen, you can edit the bus parameters of the local database for
special optimization. The local database can be either a file or be on the CP
(online). The parameters can be freely edited. In the offline mode, a locally
edited file is declared as local. If network matching is later performed, the
user is informed that this file has been specially edited. Before overwriting
the bus parameters with the global bus parameters you must confirm your
intention.
☞
Remember that any input that is not compatible with the
network can reduce the performance of your network.
Basics of Configuration B8976060/02
Volume 1 6 - 28