Technical data

Select Edit -> Local Network Parameters to call the COM screen. The
screen has the following layout:
Input fields:
Highest station
address (HSA):
Highest station address, specifies the highest station
address of an active station in the bus system.
Addresses for passive stations can be higher than the
HSA (range of values: highest active address in the
network .. 126).
Bus parameters:
Data rate: Data rate on the bus (range of values: 9.6 Kbps, 19.2
Kbps, 93.75 Kbps, 187.5 Kbps, 500 Kbps and 1.5
Mbps).
SINEC NCM (EXIT)
Edit Local Network Parameters
L2 station address :
Highest station address (HSA) :
Cumulative topology data :
Source:
F
2
F
3
F
4
F
5
F
6
F
7
F
8
SELECT
OK
1
F
Bus parameters :
Bus parameter data :
bps
Medium redundancy
Maximum no. of retries
Default SAP
Data rate
:
:
:
:
Slot time (TSL)
Setup time (TSET)
Minimum station delay (min TSDR)
Maximum station delay (max TSDR)
Target rotation time (TTR)
GAP update factor (G)
:
:
:
:
:
:
bit times
bit times
bit times
bit times
bit times
bit times
msec
msec
msec
msec
msec
msec
HELP
Fig. 6.10 Edit -> Local Network Parameters Screen
B8976060/02 Basics of Configuration
6 - 29 Volume 1