Technical data

- Network file: Here, a network file is displayed whose name was
assigned in the Edit -> CP Init screen and which
contains bus parameters created with Edit network
parameters. As default, the name of the last processed
network is displayed (possible selections: alphanumeric
characters and the period, format: xxxxxNCM.NET only
the characters in the name marked with x are freely
selectable. If you type in more characters, a message is
displayed.)
Algorithm This parameter specifies the algorithm according to
which the bus parameters are written into the
databases of the network.
Currently only "STANDARD" is supported.
STANDARD
:
The bus parameter field is adopted from the Global Bus
Parameters screen and written into the databases.
Output field
Dest. file Here, all the databases are displayed that are assigned
to the network and in which the network parameters will
be inserted.
Function keys
F7
OK
The "OK" function key enters the data.
☞
If the local network parameters of a CP database file have
been edited (in the local network parameters screen), a
message to this effect is displayed (Bus parameters edited
locally, overwrite?). The bus parameter field of this database
can then be overwritten with the global bus parameters
(function key F1).or you can retain the locally edited data
(function key F3).
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
B8976060/02 Basics of Configuration
6 - 37 Volume 1