Technical data

6.6 Transfer Functions
Using the transfer functions, a parameter set, e.g. a submodule file of a CP
created locally can be transferred. The commands start, stop and delete are
used. In addition to this, it is possible to transfer data from one file to
another and to transfer files to the PLC. When transferring from a memory
submodule to hard disk, the parameter Submodule type is automatically set
to "EPROM" in the SYSID block, regardless of the actual type of
submodule. When transferring from a diskette or hard disk to a memory
submodule, the Submodule type parameter is automatically matched to the
current type of memory submodule.
After selecting the Transfer function in the menu bar, the menu items shown
in Fig. 6.18 appear in the pull-down menu.
screen
CP Database Transfer
->FD->CP
Transfer
Menu item
= Init Edit ...
SINEC NCM
Further
menu items
screen
CP Database Transfer
->FD->FD
screen
Transfer->Delete CP
screen
Transfer->Delete FD
dialog box
Transfer->Start CP
dialog box
Transfer->Stop CP
dialog box
Transfer->CP status
Transfer->
screen
PLC Database Transfer
sub menu
Transfer->
CP Database Transfer
CP Database Transfer
->CP->FD
screen
CP Database Transfer
->EPROM->FD
screen
CP Database Transfer
->FD->EPROM
screen
Fig. 6.18 NCM Menu Transfer Function
Basics of Configuration B8976060/02
Volume 1 6 - 46