Technical data

In the ONLINE mode, the transfer is between the hard disk (= FD) and the
memory submodule of the CP. If the memory submodule is an EPROM,
only transfer from EPROM to diskette is possible ONLINE.
6.6.1 Start CP / Stop CP / CP Status
The CP recognizes the modes RUN and STOP. The RUN mode is the
normal operating status of the CP. In this mode, it is not possible to modify
the database. It is only possible to read from the CP. In contrast, in the
STOP mode, the CP can be written to. For this reason, before using the
functions "Transfer -> FD -> CP" or "Transfer -> Delete CP", the CP must
be switched to the STOP mode. The CP can be stopped directly with the
START/STOP switch or by a COM function.
The following functions are available:
➣
Start CP
➣
Stop CP
➣
CP status.
The functions can be activated directly from the NCM menu and logically
belong to the "Transfer" menu item.
6.6.1.1 Start CP
Select
Transfer -> Start CP
to call the function. This function switches the
CP to the RUN mode. A dialog box which you can exit by pressing a key or
clicking with the mouse informs you whether the function was successful or
not.
B8976060/02 Basics of Configuration
6 - 47 Volume 1