Technical data

6.6.4 CP Database Transfer
Select
Transfer -> CP Database Transfer,
to change to the submenu.
6.6.4.1 FD -> CP
Submodule files created OFFLINE are transferred to the CP. The PG must,
however, be connected ONLINE (via the PG interface or the bus) with the
CP at the time of the transfer. There must be a RAM submodule inserted in
the CP. As the submodule file, the database file specified in the Init -> Edit
screen is used. Select
CP Database Transfer -> FD -> CP,
to call the
COM screen. The screen has the following layout:
The COM asks whether single blocks or all blocks are to be transferred. If
the network belonging to the database is inconsistent, a warning is
displayed. If you acknowledge the message, the function is continued. You
can abort the function with ESC
F
1
F
2
F
3
F
4
F
5
F
6
F
7
F
8
Transfer - Database - FD ->CP
SINGLE
CP Type :
Source :
Dest. : CP
TOTAL
(EXIT)
HELP
SELECT
Fig. 6.21 Database Transfer -> FD -> CP Screen
B8976060/02 Basics of Configuration
6 - 51 Volume 1