Technical data

Function keys:
F1
SINGLE
The blocks are transferred singly to the CP. For the
meaning of the individual blocks refer to Fig. 6.27/6.28
in this chapter.
F2
TOTAL
The blocks are all transferred to the CP.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
☞
Make sure that the size of the RAM submodule matches the
submodule size set with "Edit CP Init" (Fig. 6.8).
Basics of Configuration B8976060/02
Volume 1 6 - 52