Technical data

Output fields:
Dest. file This is the file in which the database from the CP is
stored.
Function keys:
F1
SINGLE
The blocks are transferred singly to the CP. For the
meaning of the individual blocks refer to Fig. 6.28 in
this chapter.
F2
TOTAL
The blocks are all transferred to the destination file.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
Basics of Configuration B8976060/02
Volume 1 6 - 54