Technical data

6.6.4.3 FD -> EPROM
The data records on FD (diskette or hard disk) are written directly to the
EPROM (blown). Select
CP Database Transfer -> FD -> EPROM
to call
the COM screen. The screen has the following layout:
Input fields:
Programming
number:
Here, you enter the programming number of the
EPROM type you are using. You can select this from
the NCM selection menu.
☞
Make sure that the EPROM type matches the programming
number. If the assignment is wrong, the EPROM submodule
is destroyed.
You should also make sure that the size of the EPROM
matches the submodule size preset in "Edit CP Init" (Fig. 6.8).
F
1
F
2
F
3
F
4
F
5
F
6
F
7
F
8
Transfer - Database -> Eprom
Programming number
:
OK
SELECT
CP type :
Source :
(EXIT)
HELP
Fig. 6.23 CP Database Transfer -> FD -> EPROM Screen
B8976060/02 Basics of Configuration
6 - 55 Volume 1