Technical data

Input fields:
Dest. file Here, you specify the drive (e.g. A: for floppy disk or B:
for a hard disk) and the name of the destination file
(possible values drive: "A" to "Z", file name:
alphanumeric characters and the period).
Function keys:
F1
SINGLE
The data are read from the EPROM into the destination
file in blocks. Refer to Figs. 6.27 and 6.28 in this
chapter for the meaning of the individual blocks.
F2
TOTAL
All the data are read from the EPROM and stored in
the destination file.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key.
Basics of Configuration B8976060/02
Volume 1 6 - 58