Technical data

General Procedure:
During configuration, the following must be done for each station:
➣
A database file must be assigned in the Init -> Edit screen per station
and the status OFFLINE entered.
➣
The Edit -> CP Init screen must be completed, i.e.:
– assignment of an L2 address
– setting of the base interface
– entering of a valid network file for each station on the bus
– entry of the plant designation and the date created (optional)
➣
In the Edit -> Global network parameters screen:
– entry of the highest station address (HSA)
– entry of the "bus parameters"
– entry of the "bus parameter data"
The global network parameters only need to be entered once, since they
are automatically available to the other stations when the network file is
entered.
Once these data have been entered for every station in the network, the
network matching function is then required to match the global network
parameters. This is performed with the menu item (Network -> Network
Matching).
Other global network functions are described in Section 6.5.4.
B8976060/02 Basics of Configuration
6 - 61 Volume 1