Technical data

7.1.2 Checking with ANZW and PAFE
The status word
is part of a double word specified in the calling HDB. The
second part of the double word is formed by the length word which
indicates how much data has already been transferred for the current job.
Following synchronization, the status words of all the HDBs (ANR) assigned
parameters with COM 5430 TF/COM 5431 FMS contain the value 0008
H
. If
the ANR used is incorrectly or not configured in the COM, the ANZW has
the value 0F0A
H
.
Not
used
Error
bits
Data
mgment.
Status
bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Job complete with error
Job complete without error
Receive possible
If
bit
set
Job active
Fig. 7.4 Structure of the Status Word, here: Status Bits
Not
used
Error
bits
Data
mgment.
Status
bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
For meaning of
the error bits:
refer to table 7.3
Data acceptance complete
Data acceptance/transfer
enable/disable
Data acceptance/
transfer active
Data transfer
complete on CP
(The data management is the responsibility of the appropriate HDB)
Fig. 7.5 Structure of the Status Word, here: Data Management
S5-S5 Communication B8976060/02
Volume 1 7 - 6