Technical data

These links are either saved in a submodule file (offline mode) or written
directly to the CP submodule or modified there (online mode). This means
that submodule files created offline can also be loaded on the CP or that
the contents of the CP submodule can be saved in a file.
Select Edit -> Links -> S5-S5 Links to call the following screen. The screen
is structured as follows:
Input fields
Remote L2
station address
Here, you enter the address of the remote station
(range of values: 1 .. 31)
PRIO (H/L/I): Specifies the priority of the jobs. The default is "LOW".
(Possible entries: "LOW", "HIGH" "Interrupt").
"LOW": frames with this priority are normal frames. After receiving the
token, and if there is sufficient token holding time, frames with low priority
are sent.
Link Editor S5-S5 Links
Block does not exist
Local L2 station address:
PRIO (H/L/I):
SSAP :
DSAP :
Remote L2 station address:
Parameters sending:
SSNR:
ANR:
Parameters receiving:
SSNR:
ANR:
SELECT
+1
-1
INPUT DELETE
OK
F
1
F
2
F
3
F
4
F
5
F
6
F
7
F
8
CP type:
Source:
(EXIT)
HELP
Fig. 7.9 S5-S5 Links Configuration Screen
S5-S5 Communication B8976060/02
Volume 1 7 - 12