Technical data

Chapter A and B
Abbreviations and Index
The list of abbreviations will help you considerably when working with this
manual since you can check the meaning of unknown abbreviations quickly.
You can use the index to find a term quickly.
Chapter C
Further Reading
This section lists publications and manuals dealing with related aspects
(marked in the text with
/x/
).
Volume 2 of the CP 5431 FMS
manual explains the range of functions of
the FMS protocol architecture.
The user interface to the corresponding FMS services is described for
SIMATIC S5.
It provides you with the following information:
➣
Handling
Acyclic communication or
Cyclic communication on the basis of FMS
➣
Documentation and Test
➣
Request Editor
Volume 2 of the CP 5430 TF
manual explains the range of communication
with layer 7 (application layer). It describes the user interface to the
corresponding SINEC technological functions (TF) for SIMATIC S5 and for
TF configuration.
This volume provides important information for:
➣
Detailed configuration of the communications processor under TF and
how to configure communication objects (variables, domains etc.)
➣
Operating the interfaces supported by the CP under TF
➣
This volume also introduces the additional packages belonging to the
functional range of the COM system program for menu-guided support
of the TF client interface with the Request Editor.
❑
Introduction B8976060/02
Volume 1 1 - 8