Technical data

Output fields:
L2 station address: The address of the currently addressed station is
displayed.
Input/output
area:
Here, the I/O area is displayed in which the variables to
be programmed will be simulated.
From:
the first byte of the block in the I/O area
To:
the last byte of the block in the I/O area
(Range of values: area programmed in the I/O area.)
Input fields:
Output: Output byte to be transmitted. (Range of values PY 0 ..
254, OY 0 .. 254).
GO: Global object or "global I/O byte" (GPB). (Range of
values 0 .. 2047)
.
Symbol: Symbolic ID of the GO (Range of values 8 ASCII
characters )
.
Input: Input byte to be read in. (Range of values PY 0 .. 254,
OY 0 .. 254).
Function keys:
F3
Q<->I
Change between inputs and outputs.
F5
INSERT
An empty line is inserted at the current cursor position.
F6
DELETE
Deletes the line marked by the cursor in the input or
output area.
F7
OK
The "OK" key enters the data. If the module file does
not yet exist, it is set up when you confirm the entries.
B8976060/02 Communication with Global I/Os
9 - 33 Volume 1