Technical data

10.1.1 Checking the Data Transmission with ANZW and the ZP
Station List
☞
If there is a group error message, bit 3 of the status word
(status bit) is not set.
Not
used
Error
bits
Data
mgment.
Status
bits
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Job complete with error*
(e.g. invalid job number)
Job complete without error
SEND synchronization disabled
RECEIVE synchronization possible
Synchronization done without error
(Input GP was received)
* Bit 3 of the status bits is not connected with the error bits (8..11).
When bit 3 is set, the error is not specified by the error bits. All the errors
listed in table 7.3 are possible.
Fig. 10.8: Structure of ANZW for HDB SEND (ANR 210) and RECEIVE (ANR 211), here:
Status Bits
Communication with Cyclic I/Os B8976060/02
Volume 1 10 - 16