Technical data

11.6 Configuring
The PG package SINEC NCM with COM 5430 TF/COM 5431 FMS is used
to configure the DP functions.
The screens you require for configuring are provided by SINEC NCM as
shown in Fig. 10.12.
➣
Assignment/reservation of the I/O areas required for the DP service
➣
Assignment of parameters to the DP slaves to be addressed
➣
Entry of the DP polling list in the DP editor
➣
Documentation and Test
☞
When you transfer a database CP->FD, the DP slaves
configured in the database are not entered in the network
table. The DP slaves can be entered by entering the lines
individually in the DP editor (Section 11.6.3).
= Init Edit ...
SINEC NCM
I/O Areas
DP Editor
Edit
Menu item
Dokumentation and
Test in Chapter 14
dealt with in separate chapters
I/Os
Menu item
Assign parameters
to DP slave
Fig. 11.12 DP Configuration
Distributed I/Os (DP) B89060/02
Volume 1 11 - 22