Technical data

Function keys:

The "OK" key enters the data. If the module file does

not yet exist, it is set up when you confirm the entries.

SELECT

If you press this key, a selection list is displayed with

possible entries for fields which cannot be edited freely.

Select values from the list with the cursor keys and

enter them in the field with the return key.

☞

The input or output area must always begin with an even byte

number and must always end with an odd byte number.

Note:

The fields remain empty if no input or output areas are required for the

distributed I/Os.

The input area/output area for DP must not exceed a maximum of 256

bytes.

☞

The I/O area reserved for the DP must not be used for I/O

modules! Online modification of the DP area is only

recognized by the CP after POWER OFF/POWER ON!

B8976060/02 Distributed I/Os (DP)

11 - 25 Volume 1