Technical data

F3
GLOB.DAT.
Change to the fields watchdog monitoring time, min.
Polling cycle time and clear DP.
F5
DELETE
Delete the input and output areas of a L2-DP slave.
F7
OK
With the OK function key, you enter the data. If the
module file does not yet exist it is created after you
press this key.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select values from the list with the cursor keys and
enter them in the field with the return key
This function key appears only after you press the function key F3
GLOB.DAT.:
F3
LIST
Change to the I/O area entries for the DP
slaves.
Assignment of the DP I/O areas to the I/O modules in the slave
The following rules apply:
➣
The selected I (input) area is assigned to the input modules beginning
at the left without gaps.
➣
The selected Q (output) area is assigned to the output modules
beginning at the left without gaps.
B8976060/02 Distributed I/Os (DP)
11 - 35 Volume 1