Technical data

12.9.4 Program Example for the FDL_LIFE_LIST_CREATE_LOCAL
Service
For the example, DB 143 is set up to store the request and confirmation
data.
The following parameters must be specified for the FMA service
FDL_LIFE_LIST_CREATE_LOCAL:
com_class : 00 = request
service_code : 1B
H
= FDL_LIFE_LIST_CREATE
_LOCAL
After accepting the confirmation block with the HDB RECEIVE, the values
are entered in the DB and can then be processed further by the user
program.
DB 143 Explanation
0: KH = 0000;
1: KY = 000,000
2: KY = 027,000
3: KY = 000,000
4: KY = 000,000
5: KH = 0000;
6: KY = 000,000
7: KY = 000,000
8: KY = 000,000
9: KY = 000,000
**** REQUEST_HEADER******
com_class / user_id
service_code / no significance
no significance / no significance
no significance / no significance
******CONFIRMATION*******
com_class / user_id
service_code / link_status
no significance / no significance
no significance / no significance
10:KM = 00000000 00000000
11:KM = 00000000 00000000
12:KM = 00000000 00000000
13:KM = ....
14:KM = ....
15:KM = ....
16:KM = ....
17:KM = ....
Status TN 00 / Status TN 01
Status TN 02 / Status TN 03
Status TN 04 / Status TN 05
.....
.....
.....
.....
.....
Table 12.19 DB 143
B8976060/02 Service and Diagnostics using FMA Functions
12 - 43 Volume 1