Technical data

12.9.7 Program Example for FDL_READ_LAS_STATISTIC_CTR
Service
For the example, DB 146 is set up to store the request and confirmation
data.
The following parameters must be specified for the FMA service:
FDL_READ_LAS_STATISTIC_CTR:
com_class : 00
H
= request
service_code : 1E
H
= FDL_READ_LAS_STATISTIC_CTR
After accepting the confirmation block with HDB RECEIVE, the values are
entered in the DB and can be read out.
DB 146 Explanation
0: KH = 0000;
1: KY = 000,000
2: KY = 030,000
3: KY = 000,000
4: KY = 000,000
5: KH = 0000;
6: KY = 000,000
7: KY = 000,000
8: KY = 000,000
9: KY = 000,000
**** REQUEST_HEADER******
com_class / user_id
service_code / no significance
no significance / no significance
no significance / no significance
******CONFIRMATION*******
com_class / user_id
service_code / link_status
no significance / no significance
no significance / no significance
10:KH = 0000;
11:KY = 000,000;
12:KH = 000,000;
13:KH = 000,000;
14:KH = 000,000;
15:KH = 000,000;
las_cycle_ctr (reference)
1st act. station / 2nd act. station
3rd act. station / 4th act. station
:
:
:
1x:KH = 000,000; nth act. station
Table 12.23
B8976060/02 Service and Diagnostics using FMA Functions
12 - 51 Volume 1