Technical data

Sel: Indicates with an asterisk that a line is selected.

Pos: Line index.

GO: Global object or object name of the input.

Input: Physical assignment of the input bytes of this station.

Sender: L2 address of the GP sender. A GP byte, that has not

yet been received cannot be assigned to a sender and

is marked as n.e. (non-existent).

Value: Value of the input in KH (hexadecimal) and KM (bits).

Error: "X" indicates that a GP byte was received from two

different stations.

Function keys:

UPD ON

Using this key, you can update the content of the

screen. Pressing this key activates the automatic, cyclic

updating of the screen data, pressing it again

deactivates the automatic updating.

SELECT

Using this key, or the enter key, you can select lines

from the complete list of the input values screen by

marking them with the inverse bar controlled by the

cursor keys. These selected lines are then the only

lines displayed after pressing the update key F1. You

exit this mode with the ESC key.

DESELECT

With this key, you can cancel the selection made with

F7.

B8976060/02 Documentation, Test

14 - 19 Volume 1