Technical data

Pos: Display position. links are displayed in ascending order
(0-255).
rem. add.: Address of the remote station.
DSAP: Remote SAP of the configured link.
Output area: Physical output area of a ZP link.
Input area: Physical output area of a ZP link.
M: Specifies how often a station is entered in the polling
list.
Status: Provides the status of the selected station
(hexadecimal) (see Table 14.4 and Table 14.5).
Function keys:
F1
UPD ON
Using this key, you can update the content of the
screen. Pressing this key activates the automatic, cyclic
updating of the screen data, pressing it again
deactivates the automatic updating.
F2
INPUTS
This calls the screen for the inputs of the currently
selected link. Using the cursor keys, you can select a
line with the inverse bar and examine it more closely.
F3
OUTPUTS
This calls the screen for the outputs of the currently
selected link. Using the cursor keys, you can select a
line with the inverse bar and examine it more closely.
F7
SELECT
Using this key, or the enter key, you can select lines
from the complete list of the input values screen by
marking them with the inverse bar controlled by the
cursor keys. These selected lines are then the only
lines displayed after pressing the update key F1. You
exit this mode with the ESC key.
F8
DESELECT
With this key, you can cancel the selection made with
F7.
Documentation, Test B8976060/02
Volume 1 14 - 22