Technical data

The PG has an internal L2 interface:
This path (see Fig. 15.2,15.3), symbolized by the path name can be used to
monitor the selected station and if necessary to reconfigure it using the
appropriate software packages (COM, LAD/CSF/STL).
The two paths shown here are examples that can be extended and modified
to fit other topologies. It is, for example, possible to implement gateways
between H1 and L2 networks (see Fig. 15.4).
Before you can use a path, you must first edit it using a suitable tool (Bus
selection). This utility can be obtained both under SINEC NCM as well as
under the normal S5 interface (KOMI).
L2
PG
"Dest CP"
ENDP
(e.g. CPU connected to
dest. CP with a
"swing cable")
e.g.CP L2
Fig. 15.3 PG via Internal L2 Interface (Path_2)
B8976060/02 Utilities
15 - 3 Volume 1