Technical data

The screen for Init->Path selection has the following structure
Input fields:
CP link
/Path file:
Format: drive: file
Drive
Here, you must specify the drive you wish to work with.
If you press F8, possible drives are displayed for
selection.
Path file
Paths with different path names can be stored in this
PATH FILE. A path file can contain up to 100 different
paths. The path files are all of the type AP.INI (range of
values: max. 6 ASCII characters).
Path name: Each edited PATH in the path file is assigned a path
name which you supply here in order to select the
required PATH. (Range of values: max. 19 ASCII
characters, first character must be a letter.)
☞
If a path name is entered in the corresponding field, online
operation is not possible via the AS 511 interface.
☞
Once a path name has been entered, it is stored by SINEC
NCM even if the PG is switched off.
Function keys:
F7
OK
The "OK" key enters the data.
F8
SELECT
If you press this key, a selection list is displayed with
possible entries for fields which cannot be edited freely.
Select entries from the list with the cursor keys and
enter them in the field with the return key
B8976060/02 Utilities
15 - 9 Volume 1