Technical data

16 Working with the Application Examples
On the COM 5430 TF/COM 5431 FMS diskette, you will find all the COM
and STEP 5 user files required to work through the application examples.
The application examples were written for RAMs on both the CPs and the
CPUs.
The following general procedure is recommended for working with the
example programs:
➣ Delete the CPUs and switch to the STOP mode.
➣ In the SIMATIC S5 package, select the preset ON and select the
program file you want to work with.
➣ Transfer all the blocks from FD to the CPUs.
➣ Switch the CPs you are using to STOP with the mode selector switch.
➣ Call the COM and select the required database file on diskette in the
menu item "INIT -> EDIT".
➣ Transfer the database files to the CP with menu item "TRANSFER ->
CP Database Transfer -> FD -> CP" and the key F2 TOTAL.
➣ Switch the CPs to RUN.
➣ Once the configuration data have been transferred to the CPs, you
must switch the power off and on again so that the CPs accept the new
configuration (SSNR, I/O area being used).
➣ Switch the CPUs of the programmable controllers to RUN.
B8976060/02 Working with the Application Examples
16 - 1 Volume 1