Technical data

Bit 11
10
98
of the status word
or
Transmission delay in the other station, i.e. the
PLC cycle was faster than the transfer capacity
of the L2 bus (transmitted data of the remote
station could not be fetched quickly enough
by the L2 bus).
Reception delay in the local PLC, i.e. the transfer
capacity of the L2 bus was faster than the PLC
cycle (while the received data was being evaluated
in the local PLC, the L2 bus had supplied new data
data which could no longer be evaluated).
At least one remote station is in the STOP status
GP image is incomplete
(either not all stations have started up
or
at least one station has dropped out)
Reserved for ZP error message
Fig. 17.3 Meaning of the Error bits in the Status Word in RECEIVE
B8976060/02 Appendix
17 - 11 Volume 1