Technical data

4.1.3 Technical Data of the CP 5430 TF/CP 5431 FMS
4.1.3.1 Interfaces
PG interface: TTY
max. 1 km long
transmission protocol Siemens AS 511
9.6 Kbps
L2 interface: RS 485
L2FO interface: Plastic HP duplex
☞
The L2FO interface and the 9-pin RS 485 connector must
never be both connected at the same time. If the L2FO
interface is not being used, it must be closed with the rubber
plug supplied. Light falling on the receiver diode can cause
disturbances.
4.1.3.2 Operating and Environmental Conditions
Type of protection: IP00
Permitted ambient
temperature:
0 ... 55 °C
Permitted storage
temperature:
- 40 ... + 70 °C
Humidity class: F complying with DIN 40040
(15 ... 95 % no condensation at 25 °C)
Operating altitude: up to approx. 3,000 m above sea level
Technical Description and Installation of the CP 5430 TF/CP 5431 FMS B8976060/02
Volume 1 4 - 12