Technical data

4.3 Installation Guidelines
4.3.1 Basic Configuration
Fig. 4.6 illustrates the minimum configuration of a SINEC L2 bus system.
➣
Communications processor CP 5430 TF/CP 5431 FMS
➣
Bus terminal with terminal cable
➣
Bus cable
4.3.1.1 CP 5430 TF/CP 5431 FMS Slots in the various PLCs
The CP 5430 TF/CP 5431 FMS communications processor is designed as a
board in double Eurocard format. The front panel is 1 1/3 standard slots
wide.
The CP 5430 TF/CP 5431 FMS can be used in the CP slots of the PLCs
listed in Section 4.1.2.
The module is supplied in a compact design and can be operated without a
fan. If the module is to be inserted in the S5-115U, an adapter casing is
required.
.
.
P
L
C
L2
interface
bus cable
Bus terminal 1
with terminal cable
Bus terminal 2
with terminal cable
PG
interface
(AS 511)
C
P
C
P
Fig. 4.6 SINEC L2 Components
B8976060/02 Technical Description and Installation of the CP 5430 TF/CP 5431 FMS
4 - 21 Volume 1