AquaCube Ultra-filtration Water System Installation and Maintenance Manual MODEL CUW4 Please read the User's Manual carefully and keep it available.
Product Overview .................................................................. 3 Filter Specifications and Replacement Instructions ....... 4 Filter Indicators ....................................................................... 5 Quick Tips ................................................................................ 6 CUW4 Installation .................................................................. 8 Usage Recommendations ..................................................
Product Overview 3
Filter Specifications and Replacement Instructions Filter Name Functions Service Life # Pieces PP cotton filter Provides rough filtration for raw water and blocks substances visible to the naked eye 4-6 months 1 6-12 months 1 18-24 months 1 6-12 months 1 Front active carbon Absorbs abnormal colors and smells, residual chlorine, and some organics (methenyl filter trichlorlde, carbon tetrachloride) Ultrafiltration filter Blocks bacteria (total chloroforms) and substances visible to the naked
Filter Indicators The device includes a display that indicates remaining service life on the filter. The service life is only an estimate. The actual maintenance cycle will vary according to geographic location, local water quality, amount of use, and season of the year. Periodically cleaning and replacing the filter will help maintain water cleanliness and quality. To replace the filter, open the cover, pull the handle, take out the filter, replace the filter, lock the filter, and put the cover back on.
Quick Tips Inlet Water Valves of different sizes Some homes may have a 1/2-inch inlet water valve that is not compatible with the 3/8-inch Feed Water Adapter (AFW). Please get an adapter from your local plumbing store or contact us. If drilling is necessary, make sure that no power or water lines are in the way. Use of Quick-Fitting 1. Viewing from the open end, a quick-fitting starts with the Collet, Lock Clip (usually blue in color), and Fitting Body. 2.
Drilling a Hole in Sink or Countertop 1. Search “How to Drill a Hole in Granite Countertop” on YouTube for your reference. 2. Choose a 1/2-inch Diamond hole saw for granite and a titanium drill bit for steel. 3. Use a coolant to disperse heat. Choose water for granite or oil for steel. 4. Use a 1-1/2" Suction Base Drilling Ring to hold coolant and prevent drill bit from slipping on the counter. 5. Start slowly. Be cautious, as the power drill might slip and damage the counter surface. 6.
CUW4 Installation Installing the Feed Water Adapter CAUTION: Improperly installed systems could result in water damage due to leaks or flooding. If you are not familiar with standard sink plumbing systems and the proper use of common hand and power tools 1. or have any difficulty with the installation of this system, please consult Turn off your Inlet Water Valve (COLD), and open the kitchen faucet to release water pressure. a licensed professional, such as a contractor or plumber. 2.
3. 2. Install the ¼-inch tubing on the Feed Water Adapter using the ¼inch wrench. Tighten by hand, then use the wrench to tighten the Front Plate with black rubber washer onto the faucet stem. another half- to one turn. If you received the Feed Water Adapter Insert the faucet stem into the hole on the counter. Optionally, with quick-fitting, simply insert the tubing ½ inch deep into the plumber’s glue or sealer could be used. fitting. It will lock automatically. 3.
Installing the tubing (check Quick Tips for Use of Quick-Fitting) 1. Connect tubing with AFW to the “Water In” port of the system. 2. Install quick-fitting to the faucet. 3. Connect tubing with faucet to the “Water Out” port of the system. **Make sure you remove the Lock Clip when inserting the tubing. Reinstall the Lock Clip after the tubing is inserted.
• System startup 1. period, shut off the power supply and close With a towel or bucket underneath, slowly turn on the Cold Water the three-way valve. Allow the water to run Valve, and feel the vibration and noise of the water flow. If your for 3-5 minutes before using again. water pressure is high, DO NOT turn the Inlet Water Valve all the • way up, but sparingly to a level position. 2.
Usage Precautions • Supervise use of the device by children and others as needed. • Only use authorized accessories In order to ensure safe use and prevent accidents, physical injury, and possible property loss for you and others, please follow these provided by iSpring. precautions. • When there isn't water supply or the pipe is under repair, tum off the three-way valve.
Regular Maintenance and Care Regular maintenance of the device and filter replacement can help ensure the quality of water output. When cleaning the product, do not use soap, detergent, or a strong volatile solvent such as thinner, gasoline or alcohol. Use of these substances may crack, scratch, or change the color of the device. Do not directly spray water on the device. Regularly check for water leakage surrounding the device or the water outlet faucet.
Troubleshooting The following are common issues that you should be able to resolve on your own. If these measures don’t work, please call iSpring at 678-261-7611. Issue Possible reasons Solution Water purifier generates mild noise when in use This is normal during the purifying and None needed filtering process. Water volume drops significantly Filter is jammed Flush or replace the filter. Filter has not been replaced in a timely Replace the filter.
Device hasn’t been used for more than Turn on the purified water faucet and flush three days it for 3-5 minutes. Poor quality of water source Confirm that water source is municipal tap water. Water leakage Component is damaged Cut off water and power supply, and call iSpring at 678-261-7611. No water output after replacing filter or, after The pipe or water filter is jammed Remove any obstacles from the pipe.
Warranty This Limited Warranty extends to the original purchaser of the system only. This warranty covers all Manufacturer-supplied items only that prove to be defective in material, workmanship, or factory preparation. This warranty covers parts only; all labor is excluded from this warranty, including, but not limited to, services related to the removal, replacement, installation, adjustment, maintenance, and/or repair of the unit or its components items.
of your water supply. The quality of water supplies may vary seasonably or over a period of time. Your water usage may vary as well. Water characteristics can also change if the drinking water appliance is moved to a new location. The Manufacturer assumes no liability for the determination of the proper equipment necessary to meet your requirements, and we do not authorize others to assume such obligation on our behalf.
Warranty Registration PureDrop Warranty Registration We provide a 30-day money back guarantee, one-year Manufacturer Warranty and lifetime tech support for all of our products. However, we do not have your order information from the vendors other than our website. The easiest way to activate the warranty is to go to www.123filter.com, and submit your warranty registration Your Name: Your E-Mail: Your Phone: under “Warranty Registration”.
Please remember, we love to help our customers. If you have any questions or concerns about our products, please don’t hesitate to call or email us. We will do everything we can to make your purchase a 5-star experience. 678-261-7611 support@123filter.com If you are happy with our product and service, please show your support by writing a product review on the website you purchased from, even if it’s just a single line. It takes you just a minute, but means a lot to us.
Local / International: Office Hours: 678-261-7611 Monday-Friday 9:00 a.m. – 5:00 p.m. EST Technical Support Hours: Monday-Friday 9:00 a.m. - 5:00 p.m.
