Use and Care Manual

Quick Tips

Inlet Water Valves of different sizes

Some homes may have a 1/2-inch inlet water valve that is not

compatible with the 3/8-inch Feed Water Adapter (AFW). Please get an

adapter from your local plumbing store or contact us. If drilling is

necessary, make sure that no power or water lines are in the way.

Use of Quick-Fitting

1. Viewing from the open end, a quick-fitting starts with the Collet,

Lock Clip (usually blue in color), and Fitting Body.

2. To connect, cut tubing evenly, remove the Lock Clip, push the

tubing ½ inch into the quick-fitting, and reinstall the Lock Clip. Pull on

the tubing gently to make sure it is locked in.

3. To disconnect, remove the Lock Clip and compress and hold down

the Collet into the Fitting Body to eliminate the gap where the locking

clip was occupying while simultaneously pulling the tubing out.

Note: Watch “RO Quick-Fitting” YouTube videos for your reference.