Installation manual

17
PureFlow AirDog
AirDog
®
FP-100 & FP-150 Dodge 1998.5 - 2004
Section 5-E High Flow Suction Tube
INSTALLING THE HIGH FLOW SUCTION TUBE, Cont’d
NOTE: The fuel tank used for the pictures is an example only and may not be exactly the
same as your tank.
IMPORTANT: Select a location for the suction tube that has adequate clearance
below the bed. Also consider that under hard acceleration, fuel will migrate
toward the back of the fuel tank.
5E-1. Remove the collection basket.
Figure 34
Figure 35
5E-2. Drill a 1-1/8” hole at the selected location in the fuel tank for the suction tube. Hold
a container below the drill point to catch debris.
Figure 36 Figure 37
5E-3. Remove all burrs from the edge of the hole.
Figure 38 Figure 39
5E-4. Install the grommet in the new suction tube access hole.