Installation manual

19
PureFlow AirDog
AirDog
®
FP-100 & FP-150 Dodge 1998.5 - 2004
Section 5-E High Flow Suction Tube
INSTALLING THE HIGH FLOW SUCTION TUBE, Cont’d
5E-10. If the fuel tank was dropped to install the
suction tube, re-install the fuel tank.
If the truck bed was removed, reinstall
the bed.
Section 6 Electrical Harness
The AirDog
®
is equipped with a relay controlled wiring harness.
When properly installed, the AirDog
®
is controlled by the ECM.
WIRING DIAGRAM (In Red)
Figure 44
The AirDog
®
is activated by the ECM through a relay controlled wiring harness connecting
directly to the original Deutsch ECM pump connector.
Figure 45